Development of an Enzymeless/Mediatorless Glucose Sensor Using Ruthenium Oxide‐Prussian Blue Combinative Analogue

Presented in this work is the first step towards an enzymeless/mediatorless glucose sensor. We first observed remarkable electrocatalytic oxidation of glucose using combinative ruthenium oxide (RuOx)‐Prussian blue (PB) analogues (designated as mvRuOx‐RuCN, mv: mixed valent) at ca. 1.1 V (vs. Ag/AgCl) in acidic media (pH 2 Na₂SO₄/H₂SO₄). Individual RuOx and PB analogs failed to give any such catalytic response. A high ruthenium oxidation state (i.e., oxy/hydroxy‐Ru^VII, E°≈1.4 V vs. RHE), normally occurring in strong alkaline conditions at RuOx‐based electrodes, was electrogenerated and stabilized (without any conventional disproportionation reaction) in the mvRuOx‐RuCN matrix for glucose catalysis. Detail X‐ray photoelectron spectroscopic studies can fully support the observation. The catalyst was chemically modified onto a disposable screen‐printed carbon electrode and employed for the amperometric detection of glucose via flow injection analysis (FIA). This system has a linear detection range of 0.3–20 mM with a detection limit and sensitivity of 40 μM (S/N=3) and 6.2 μA/(mM cm²), respectively, for glucose. Further steps towards the elimination of interference and the extendibility to neutral pHs were addressed.     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。     

Evaluating the mobility of toxic metals in untreated industrial wastewater sludge using a BCR sequential extraction procedure and a leaching test

The distribution and speciation of toxic metals in industrial wastewater sludge (IWS) was investigated. In this work, the modified BCR three-stage sequential extraction procedure was applied to the fractionation of Cr Pb Ni, and Cd in untreated industrial wastewater sludge from industrial sites in Hyderabad (Pakistan). The extracts were analyzed using electrothermal atomic absorption spectrometry. The procedure was evaluated using a certified reference material for soil mixed with sewage sludge BCR 483. The results from the partitioning study indicate that more easily mobilized forms (acid exchangeable) of Cd were dominant. The oxidizable fraction was dominant for all four toxic metals. Metal recovery was good, with <4% difference between the total metal recovered through the extractant steps and the total metal determined after microwave digestion. Lixiviation tests (DIN 38414-S4) were used to evaluate the leaching of toxic species from IWS, and it was observed that levels of leachable toxic metals were low compared to the amount of metal extracted in the exchangeable fraction of the BCR protocol.     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.     

Stripping Chronopotentiometry with Dry‐Preservable Supporting Electrolyte

The determination of some toxic metals by stripping chronopotentiometry with a supporting solution having an unconventional composition has been investigated with the aim of using such components in disposable measuring cells preservable in dry state and quite ready for use, only needing addition of a small volume of sample. The new supporting solution is prepared with a solid strong acid, p‐toluenesulfonic acid, in the place of the inorganic acids commonly used to improve the cation availability. The other components are, as usual, sodium chloride, which fixes the potential of the screen‐printed silver – silver chloride reference electrode, and mercury(II) chloride as the plating agent. This supporting solution has been tested in batch measurements with the mercury film glassy carbon electrode as well as with screen‐printed carbon‐ink electrodes, either with mercury film or bare. The physical shape of the mercury layer electrolytically deposited on screen‐printed carbon‐ink electrodes from a supporting solution containing 0.1 M p‐toluenesulfonic acid and 0.1 M sodium chloride has been investigated by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) microanalysis. In chronopotentiometric stripping p‐toluenesulfonic acid performs as well as the usual inorganic strong acids, particularly in terms of sensitivity. At 0.1 mol dm^?3 it proved very suitable for the determination of toxic metals, in particular lead(II), at levels down to a few μg dm^?3. The overall results appear promising and can open new avenues for preparing disposable cells for on‐field stripping chronopotentiometric determination of toxic metals.     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

Examination of the statistical method in the conjugated circuit theory

Summary The recently proposed statistical method for the calculation of resonance energies in the conjugated circuit theory is tested on the example of polyacenes. It is found that for the estimation of the resonance energy with a 10% average error, the method requires a sample consisting of about 20 (randomly chosen) Kekulé structures. Further increase of the sample size gives no significant gain in the accuracy of the method.

---

Überprüfung der statistischen Methode in der Konjugierten-Ring-Theorie

Zusammenfassung Die unlängst vorgeschlagene statistische Methode in der Konjugierten-Ring-Theorie (conjugated circuit theory) wird am Beispiel der Polyacene getestet. Es wurde festgestellt, daß für die Abschätzung der Resonanzenergien bei einem mittleren Fehler von 10% für diese Methode ungefähr 20 (willkürlich gewählte) Kekulé-Strukturen nötig sind. Weitere Erhöhung dieser Anzahl bringt keine signifikante Verbesserung der Genauigkeit der Methode.

     

Fluorinated compounds for advanced IC interconnect applications: a survey of chemistries and processes

The semiconductor industry is now in the early stages of an unprecedented change in materials set for the integrated circuit (IC) interconnect structure. The traditional layers of aluminum conductors and silicon dioxide dielectrics are being replaced by copper thin films and a variety of low k candidates, respectively. In many cases, fluorine confers desirable properties on either the precursors or the final films. At the same time, fluorine presents some potentially adverse effects, which have led to a so-called “fear-of-fluorine” in interconnect applications. This paper will review the proposed uses of fluorinated compounds in the interconnect structures, covering both precursors and the resulting thin films. Both the status of technical studies, and the prospects for commercial implementation, will be addressed.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.